Double Glazing Door Lock Repairs
Have your uPVC window or door mechanism started to fail? Perhaps the window or door handles aren't able to connect properly or are hard to use.
It is crucial that the double glazed doors operate smoothly, otherwise you'll lose energy and increase the chance of burglary. Owen the Locksmith can fix your door lock for an affordable price.
Snapped Key
If a key is snapped off inside a lock, it could be incredibly frustrating. This can also be a security risk in that it can make you vulnerable to an intruder if the door is not locked. Fortunately, there are simple fixes you can try to resolve the issue and get your door working properly once more.
First, remember to stay calm. If you panic you could end up pushing the broken key further into the lock.
Then spray WD-40 or a different penetrating oil into the lock to aid in making the broken piece slide out more easily. You can also use a screwdriver to help break up any pieces stuck that might be hindering the flow. If you have a part of the key that is stuck out, grab it with a paperclip or another thin metal object and pull it. Both methods work, but you must be careful not to push the damaged key piece further into the keyway.
Some paperclips have grooved edges that could serve as a hook extractor and Jigsaw blades can also be used for this purpose. If you don't have any of these items, you can bend a hook with needle-nosed pliers. Additionally, a pair of tweezers is a good way to grasp and pull out the last part of the broken key.
If you're unable to pull the broken piece of the key out, you can try using a lock de-icer. This is usually found in most hardware stores, and it is used to freeze any moisture or ice that may be inside the lock.
If none of these methods are working, it might be time to call a locksmith. Fitlocks experts can solve problems like broken handles and snapped keys with uPVC locks and door mechanisms. They can also reconfigure your double glazing door mechanisms to make them easier to operate. Get a double glazing repair through us online or give us a phone call to discuss your needs.
Broken Cylinder
A damaged cylinder can pose an extremely risky security issue. It's fortunately a simple repair for a professional locksmith to complete. Locksmiths will need to tap the cylinder in order to fix it. They can do this using the hammer or any other tools, but the most effective method is to make use of a long match or a piece of wire. Then, position the end of the match or wire in the keyway. After this, the locksmith will hit the lock to break it open. This is more secure than using a hammer that could cause damage to the lock.
The most frequent cause of cracks in the cylinder head is overheating. This can occur when the block and cylinder head are made from different metals such as cast-iron and aluminum. Different metals will heat up and cool down at different rates. This can cause localized hotspots to expand quicker than the rest.
Another reason that could cause cylinder cracks is corrosion. If the cylinder head as well as cylinder block are not maintained properly, this could lead to rusting or corrosion that could cause them to expand at a greater rates than they ought to. As time passes, this may also cause cracks.
If your uPVC window or door lock is brittle and requires a lot more pressure to turn, it could be due to a variety of reasons. This problem can result from a defective locking mechanism or misalignment, or a worn-out handle.
It is a quick and affordable fix that the majority of double glazing owners can accomplish. A professional locksmith should be able to solve the issue within an hour of arriving at your property. They can repair the locking mechanisms, or replace the window handles and change the gearboxes, depending on your specific needs. A skilled locksmith will always be able to advise you on the most cost-effective solutions for your home. They can also suggest upgrades to the highest-security 3 Star euro cylinders TS007 that provide an extra layer of security against burglars. It is a small cost to get the peace of mind that comes from knowing your uPVC door is secure.
Broken Handle
It's not surprising that window handle locks may break. They are equipped with complex mechanisms which deteriorate over time. If yours is damaged, it can be difficult to identify the cause of the issue. Make sure you fix it properly.
Fixing double glazing repairs near me , regardless of whether it's the internal locking mechanism or latch can increase the security of your uPVC door and reduce the risk of draughts. When you aren't doing it right, replacing or repairing your handle can be expensive and can cause damage to the door's frame and lock and frame, so it's worth spending some time to do it right.
With the window open then loosen the screw that holds the handle with a screwdriver. This should be located on the inside of the back plate, and is normally hidden by an attractive cover for the screw for aesthetic reasons. Be careful not to damage any of the internal parts within the handle, such as the plates or levers on the opposite side of the spindle. Keep them in the same arrangement to make it simpler to replace them in the event of a need.
Then, turn the handle to make it 90 degrees to the window frame and loosen the screw on the back of the handle that fixes it to the internal spindle with a second screwdriver. Once the screw is loose, you should be able to pull the handle away and pull off the damaged spindle. Replace it with a brand new one, making sure it's the same length as the old one (you can usually find these on the internet or at hardware stores) and screw it securely into the right place. Be careful not to overtighten as this could damage the handle or the window frame.
Close the handle and test it. It should function smoothly, and you will be able open your window once more.
Make sure to check that your uPVC window is shut properly when you're working with the handle. If they're not closing properly then you may experience damp and draughts in your home as in addition to compromising the efficiency of your home's energy usage. Core Sash Windows is a local window company that can alter the hinges of your window frames to ensure that they shut properly.
Broken Spindle
It is often the case that the spindle within a handle breaks rather than the handle itself. This is especially common with uPVC tilt-and-turn windows. These windows require a handle to operate an electronic locking mechanism within the frame of the window. The handle is attached to a central rod that triggers the mushroom-shaped locking cams that secure into the frame of the window keep. If the dead latch mechanism is not able to open when the handle is turned, it is likely that the spindle has been damaged and this could be a very frustrating issue.
Fortunately there are steps that can be taken to fix this problem. A good locksmith can quickly and efficiently fix this problem. A professional locksmith will be able to disassemble the window's handle using a tool that removes the wheel portion that houses the spindle. This can be done without causing any damage to the handle or causing other damage to the frame of the window.
Once the wheel has been removed the technician can then inspect the spindle and determine what has caused it to break. This involves disassembling the spindle and examining each component, noting any damage or excessive wear. This procedure is typically carried out by technicians in a clean and safe environment.
The next step is to clean the damaged spindle, this will remove any dirt or other debris that might be hindering its normal operation. The spindle may be replaced or repaired. If the technician is replacing the spindle, he can use a dowel that is the same size to the original. Then, he will drill matching holes into both pieces. This will ensure that the new spindle has a precise fit with the handle.
If the damaged spindle is beyond repair, it may be necessary to replace it entirely. Home centres sell generic replacements. However, If the style of your window is rare then you will need to speak with a woodworker or cabinet maker who can make the exact model for you. Once the new spindle is in place it can be positioned to the handle by lining up the screw holes in the handle with the frame's existing screws. Once the handle is set, you are able to operate your uPVC windows.